On-Screen Status Displays In Manual Mode - Pioneer LD-V8000 Level III User Manual

Chapter Two • LD-V8000 Level I & III

2.5 On-Screen Status Displays in Manual Mode

The LD-V8000 displays messages on the monitor using its own internal character
display. Display commands sent to the player by pressing the DISPLAY button on the
remote control will cause the chapter and frame numbers (CAV discs) or chapter and
time numbers (CLV discs) to be displayed in the upper left corner of the video
monitor. NOTE: Chapter numbers will be displayed only if they have been encoded
on the disc at the customer's request. NOTE: The LD-V8000 can also access
extended time numbers (hours, minutes, seconds, and frame number) if they have
been encoded on the disc.
Audio commands are sent by pressing the AUDIO button on the RU-V103 or the
AUDIO 1/L and AUDIO 2/R buttons on the RU-V6000T. The current audio status of
the player is displayed across the upper center of the video monitor. Speed
commands are sent to the player by pressing the remote control SPEED Buttons (Up
or Down on the RU-V103; Slow or Fast on the RU-V6000T). The player's current
speed setting is displayed across the top of the video monitor.
The type of address the player will search to (Chapter, Frame, Time or Time frame
number) are established and displayed on the screen in Level I by pressing the
Frame/Chapter/Time button on the remote control unit. These can be toggled
through by pressing the remote control Chapter/Frame/Time button repeatedly.
2.5.1 Chapter, Frame Number, and Time Displays
02 02638
Figure 2-V
the final frame and chapter numbers displayed are maintained on the screen.
02 0 : 26 . 38 12
Figure 2-W
2-24
While playing a CAV disc, the player displays Chapter
and Frame numbers as follows:
The two digit chapter number and five digit frame
number are displayed on the top line of the monitor
(display line 0) as in the example in Figure 2-V. The
two digits indicating a chapter number are not
displayed if a disc does not have chapter numbers.
During lead-in no chapter or frame numbers appear.
The chapter and frame numbers can be displayed only
when active video starts on the disc. During lead-out,
While playing a CLV disc, the player displays chapters
and time numbers as follows:
The two digit chapter and seven digit time numbers
are displayed on the top line (display line 0) in Figure
2-W. The two characters indicating a chapter
number are not displayed if the disc does not have
chapter numbers encoded on it.
Only the time number that indicates the hour and
minutes is displayed if the disc is not encoded with
TP 113 v. 2.0 • 2/93
LD-V8000 Level I & III User's Manual