Recall - Pioneer LD-V8000 Level III User Manual

CLV discs
(cont.)
Discs encoded with chapters but not seconds
Chapter Mode
Time Mode
Chapter Mode
Discs encoded with seconds but not chapters
Time Mode
Frame Mode
Time Mode
Discs without chapters and seconds
Time Mode
Time Mode
(Refer to Section 2.5.5 Search Flag Displayed in Manual Mode.)

14) RECALL

RU-V6000T ONLY
Function: Use this button to call up a register to hold Level II program information.
Explanation: Press this button to call up a register to be used for Level II
program codes. Only the numeric, STORE, and CLEAR buttons are effective after
a register is called. If a register is called without using an argument, register 0 is
called. If this button is pressed without using an argument after a register has
been called, the next register number is called. If this button is pressed using an
argument, the register number specified by the argument is called.
NOTE: When a register is called, the register number and the register contents are
displayed on the screen. Press the CLR/HALT button to remove the register display
from the screen. The STORE button is used to modify the register contents.
Example: Call up Register 100 and place the following arguments in successive
registers. Place the value 200 in Register 100; 300 in Register 101; and 400 in
LD-V8000 Level I & III User's Manual
LD-V8000 Level I & III • Chapter Three
TP 113 v. 2.1 • 2/93
3-15