Pioneer LD-V8000 Level III User Manual page 156

RS-232C Player Control
By opening the communication port, and sending the command mnemonics, users
can control the LD-V8000 (and other Pioneer Induistrial Videodisc players) directly
from the computer. Check to make sure that the BAUD Rate of the player is set to
match the BAUD rate of the software you are using. Also, make sure you have the
proper cable connected. (See Appendix D, LD-V8000 Cable Specifications.)
Communications software, such as Qmodem™, PROCOMM™ or the terminal
program that is included with Microsoft Windows™ 3.xx, can be used to establish
communications and send mnemonic commands to the player. This is a simple
method of testing the com port to assure the computer and player are communicating.
Microsoft Windows is a Registered Trademark of Microsoft Corp.
Qmodem is a Registered Trademark of Mustang, Inc.
PROCOMM is a Registered Trademark of DataStorm Technologies, Inc.
Appendix E Establishing RS-232C Communications
Establishing RS-232C Communications
TP 113 v. 2.1 • 2/93
E-1