Communication Control Commands - Pioneer LD-V8000 Level III User Manual

Communica. Commands — COMM. CONT.; CCR MODE REQUEST

4.7.6 Communication Control Commands

45) COMMUNICATION CONTROL
Function: Communication mode is selected.
Format: Integer
Explanation: Contents of the communication control register (CCR) are
rewritten. For the LD-V8000, selection of ON/OFF of the Auto
Status can be made.
Integer
The initial value (default value) of the CCR is set to Mode 3. With
this command, it is possible to change the communication mode
as required. If an unsupported mode is specified, an error occurs.
Execution: * CCR = 3
2 C M <C/R>
* CCR = 2
3 C M <C/R>
* CCR = 3
46) CCR MODE REQUEST
Function: Current communication mode is returned.
Format: ? M
Explanation: Contents of the communication control register (CCR) are
returned.
Execution: * CCR = 3
? M <C/R>
LD-V8000 Level I & III User's Manual
LD-V8000 Level I & III • Chapter Four
C M
Mode
2 MODE-2
3 MODE-3
Communication Mode 3
Note: an "R" is not returned
Communication Mode 2
R <C/R>
CM2
CM3
CM3 <C/R>
TP 113 v. 2.1 • 2/93
Auto-Status
OFF
ON
MODE-2
MODE-3
4-47