Pioneer LD-V8000 Level III User Manual page 78

Chapter Four • LD-V8000 Level I & III
1) An Address
depending on the address flag. When a value larger than the maximum
allowable value is input, correct evaluation cannot be made.
Addresses may be expressed as frame, chapter, time or extended time numbers:
Frame Set
Frame number
Extended time number
Time Set
Time number
Chapter Set
Chapter number
Figure 4-F
2) Integer
— This indicates that the argument should be an integer. The value
is used to set a control register to some specified value or condition.
3) (Address) or (Integer)
is indicated in parentheses, it is optional and can be omitted.
4) Command String
The maximum length of a command string is 20 characters and it is
terminated by the <C/R> code (OD hex).
• After the termination, the command string is evaluated, and executed
sequentially from the first command.
• The <L/F> code (OA hex) and <SPACE> code (20 hex), even if contained in
the command string, will be ignored because <L/F>, <C/R> and <SPACE>
are not included in the number of characters which can be transmitted in
the command string.
4-8
— The address can be a frame, time or chapter number,
CAV
N1 N2 N3 N4 N5
minimum = 00000 » maximum = 65535
CLV
N1 N2 N3 N4 N5 N6 N7
(N1=hours, N2 N3=minutes, N4 N5=seconds, N6 N7= frame numbers)
minimum = 00000 » maximum = 9595929
CLV
N1 N2 N3 N4 N5
(N1=hour, N2 N3=minutes, N4 N5=seconds)
minimum = 00000 » maximum = 95959
CAV or CLV
N1 N2
minimum = 00 » maximum = 79
N1 N2 N3
minimum = 000 » maximum = 65535
— When an argument, an address or an integer,
— A command string consists of multiple commands.
Example: FR2000SE 2300PL <C/R>
TP 113 v. 2.1 • 2/93
LD-V8000 Level I & III User's Manual