Advertisement
Quick Links
CD CDV LD PLAYER
CLD-2590
Cl
V82©
The function of both units, CLD-2590K and CLD-V820
are identical
Operating
facarlice
De
ed
a
ae
LaserMaracke
L'
LASER DISC
@ This player does not apply to business use, and CD-
ROM/CD graphic discs cannot be played with this player
COMPACT
DIGITAL AUDIO
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly.
After you
have finished reading the instructions, put them away in a
safe place for future reference.
In some countries or regions, the shape of the power plug
and power outiet may sometimes differ trom that shown in
the explanatory
drawings.
However,
the method
of
connecting and operating the unit is the same.
WARNING:
To PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT NOTICE
[For U.S, and Canadian modeis]
The serial number for this equipment is located on the rear panel.
Piaase write this seria! number on your enclosed warranty card
and keep it in a secure area.
This is for your security,
[For Canadian model]
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:
Pour
PREVENIR
LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR, UNE PRISE DE COURANT
OU UNE AUTRE SORTIE DE COURANT, SAUF Si LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only mutti-voltage models are provided with this switch,
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the factory,
the switch is set to the power requirements of the player's
destination. Check that it is set properly before plugging
the power cord into the outiet. if the voitage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows:
Use a medium-sized (flat blade) screwdriver, Insert the tip
of the screwdriver into the groove of the selector switch
and turn it to set the player to the power voltage of your
area.
|
ol
ae
Set the selector so that
arrow
points
power
voltage
of your area
(Figure shows
arrow
pointing to 226 - 246
volts.)
Vourase
seu
® PIONEER'
The Art of Entertainment
Advertisement
