Pioneer LD-V8000 Level III User Manual page 127

54) REGISTER H SET
Function: Changes the current setting of Register H. (Extended Control)
Format: Integer
Explanation: Register H contains the settings of the function switches which
are stored in the EPROM. These settings are copied to this
register when power is turned on or when they are selected in the
Function Switch Setting Mode. Once power is turned on or you
have exited the Function Switch Setting Mode, the settings cannot
be changed. This command can be used to temporarily change
the settings of the functions. It must be noted that changes to
some functions may suspend playback or disable further control.
The following functions can be set. To set a function to 1 (ON),
give the value indicated in the Integer.
To set multiple functions to 1, the values must be added up. All
eight functions can be specified in combination by using the
decimal values from 0 to 255.
The completion status will be returned immediately.
Integer
Figure 4-B.1
Execution: * Normal Mode
1 R H <C/R>
* 4 Field still Mode
LD-V8000 Level I & III User's Manual
LD-V8000 Level I & III • Chapter Four
Function
1 Still Mode Select
2 AUX 1
4 AUX 2
8 Sync On SQ Video
16 D O C
32 Audio Default
64 Input Device Set
128 Not used
R H
1
4 Field
Port
Port
Off
Off
Analog
Device 1
R <C/R>
TP 113 v. 2.1 • 2/93
REGISTER H SET
0
Normal
Video Ind.
High State
On
On
Digital
Device 0
4-57