Table of Contents
Advertisement
When controlling the 4x1 Switcher w/ Audio Decoding using the IR Remote
Control Unit, the IR channel on the Switcher must be the same as the IR channel
set on the IR Remote Control Unit. See page 11 on changing the IR channel on
the IR Remote Control Unit.
1.
From the Standby screen, press the Menu button.
2.
Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup
menu.
3.
Press the Mode / OK button.
4.
Use the Volume ▲ or Volume ▼ buttons to select the IR channel menu. In
the illustration below, the IR channel is set to 1.
5.
Press the Mute ► or Input ◄ buttons to change to the required IR channel.
6.
Press the Exit button to save the changes and return to the Misc Setup
menu.
MENU SYSTEM
Setting the IR Channel
Using the front-panel buttons
38
Advertisement
Table of Contents
