Front Panel Descriptions - Gefen GTV-AUDDEC-N User Manual

FRONT PANEL DESCRIPTIONS

1 IR
This IR receiver will accept commands from the included IR Remote Control
Unit.
2 Input ◄
This button cycles through all video and audio inputs. For each video input,
audio may be selected from the embedded HDMI audio, or the coax, optical, or
L/R analog audio inputs.
3 Volume ▼
This button is used to decrease the volume level of the audio outputs when
not in the Menu System. While in the Menu System this button will cycle down
through the current level's options.
4 Mode / OK
This button will change the audio processing mode. This button serves as a
confi rmation button when using the Menu System.
5 Exit
This button is used to exit the current menu level and return to the previous/
parent level. This button will exit the entire Menu System when on the top most
level.
6 Power
Press this button to power ON the Switcher or place it in Standby mode.
7 Power Indicator
This LED will indicate the current power state. When the LED is red, the unit is
in standby mode. When the LED is green, the unit is on.
8 Menu
This button will activate the Menu System which is where all adjustment and
settings will be made.
9 Main LCD Display
This display will show pertinent status information and will be used to make
adjustments to features in the Menu System.
10 Volume ▲
This button is used to increase the volume level of the audio outputs when not
in the Menu System. While in the Menu System this button will cycle up through
the current level's options.
11 Mute ►
This button will cycles between Mute-On and Mute-Off modes. When the
Mute-On mode is enabled, all audio output will be ceased. While in the Menu
System this button will cycle through available options in the right direction when
a feature has been selected for adjustment.
5