Resetting The Switcher To Factory Settings - Gefen GTV-AUDDEC-N User Manual

Resetting the Switcher to Factory Settings

If the Switcher needs to be reset for any reason or if you need to set the unit to
factory (default) settings, follow the instructions below.
1. From the Standby screen, press the Menu button.
2. Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup
menu.


3. Press the Mode / OK button.
4. Use the Volume ▲ or Volume ▼ buttons to select the Factory Defaults
option.


5. Press the Mode / OK button. The Switcher will prompt you to confi rm the
selection.


Press the Mode / OK button to reset the Switcher to factory (default)
settings. If the Switcher is reset, the Switcher will power OFF and then
automatically power ON after a few moments.
Press the Menu button to cancel the reset process and return to the
Standby screen.
MENU SYSTEM
Using the front-panel buttons
40