Touring Rear Master Cylinder Removal And Installation - Polaris A12MH46AX Service Manual

BRAKES
Touring Rear Master Cylinder Removal and
Installation
1. Remove the RH footwell to gain access to the rear
master cylinder.
2. If required, remove the rear brake line from the master
cylinder. Use a suitable container to catch the brake
fluid. Dispose of brake fluid properly.
Brake Fluid Reservoir
Rear Brake Line
Rear Brake MC
3. Remove the two bolts that secure the rear master
cylinder to the frame. Replace parts as needed.
4. To install the rear master cylinder, mount the master
cylinder to the frame and torque bolts to specification.
Master Cylinder to Frame Bolt Torque:
8 ft.lbs. (11 Nm)
9.32
Front Brake Line
Frame
Brake Mount
Spring
Brake Lever
= T
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
5. Reinstall the brake line and torque the banjo bolt to
specification.
Banjo Bolt Torque:
15 ft.lbs. (21 Nm)
6. Perform brake bleeding procedures as outlined in this
chapter.
= T