Polaris A12MH46AX Service Manual page 253

Table of Contents

11. Place the clutch into the Universal Clutch Compressor

Tool PU-50518. Press down on the top of the spider

assembly, pushing the spider onto the shaft.

9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual

12. Slowly compress the spider into place. If the spider

appears to bind while compressing, stop and make

sure the skip tooth on the shaft and the spider are

aligned. Once the spider passes the retaining ring

notch on the shaft, install the retaining ring.

13. Install the cam (helix) assembly over the shaft. Line

up the "X" on the cam, "X" on spider, and "X" on the

stationary sheave or use the marks previously made

before disassembly. NOTE: If the cam assembly

(helix) is difficult to install, be sure the sheaves are

aligned. To align the sheaves place the clutch

assembly on a flat surface with the cam assembly

(helix) side down. Press down on the moveable

sheave belt face with both hands and the helix will

Press Down to Loosen Helix

Chapters

Table of Contents