Controls; Wheels; Wheel, Hub, And Spindle; Torque Table2.30 - Polaris A12MH46AX Service Manual

MAINTENANCE

Controls

Check controls for proper operation, positioning and
adjustment.
Brake control and switch must be positioned to allow brake
lever to travel throughout entire range without contacting
switch body.
Align clamp
edge with
knurl
Align throttle control assembly clamp with knurl on
handlebar.
2.30
Throttle
assembly
clamp
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.

Wheels

Inspect all wheels for runout or damage. Check wheel nuts
and ensure they are tight. Do not over tighten the wheel
nuts.
WARNING
Operating an ATV with worn tires will increase the
possibility of the vehicle skidding and possible loss
of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8" (.3 cm) or less.
Inspect all wheels for runout or damage. Check wheel nuts
and ensure they are tight. Do not over tighten the wheel
nuts.
Wheel, Hub, And Spindle 
Torque Table
Item
Steel - Front Wheel Nuts
Steel - Rear Wheel Nuts
Aluminum
Front Wheel Nuts
Aluminum
Rear Wheel Nuts
Front Hub Retaining Nut
Rear Hub Retaining Nut
Specification
27 Ft. Lbs. (37 Nm)
27 Ft. Lbs. (37Nm)
30 ft. lbs. + 1/4 Turn
(41 Nm + 1/4 Turn)
30 ft. lbs. + 1/4 Turn
(41 Nm + 1/4 Turn)
60 ft.lbs. (81 Nm)
80 Ft. Lbs. (109 Nm)