Front Brakes; Pad Removal - Polaris A12MH46AX Service Manual

FRONT BRAKES

Pad Removal

1. Elevate and support the of the ATV.
CAUTION
Use care when supporting vehicle so that it does not
tip or fall. Severe injury may occur.
2. Remove the wheel.
3. Loosen pad adjuster screw 2-3 turns.
4. Remove caliper from mounting bracket.
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
5. Push caliper piston into caliper bore slowly using a C-
clamp or locking pliers with pads installed.
NOTE: Brake fluid will
compensating port into
reservoir when piston is pushed back into caliper.
Remove excess fluid from reservoir as required.
6. Push mounting bracket inward and slip outer brake
pad past edge. Remove inner pad.
BRAKES
be forced through
master cylinder fluid
9.13
9