Body; Side Panel Removal - Polaris A12MH46AX Service Manual

BODY / STEERING / SUSPENSION

BODY

Side Panel Removal

Side panel removal is quick and easy, use the following
instructions for removal and installation.
1. Remove seat by releasing the latch (if equipped) and
lifting up on the seat.
Step 1
2. Grasp the rear of the side panel near the rear cab.
With a firm motion, pull the panel outward to
disengage the side panel from the grommet. Pull the
panel downward and rearward to remove it from the
ATV.
Step 2
5.4
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
3. Reinstall the side panel by reversing the removal
procedure.
Step 3
Front Storage Box Lid / Front Rack and
Access Panel Removal / Installation
1. Open the front rack storage area.
2. Remove the (4) T-25 screws securing the access
cover to the front cab as shown below.
3. Move the seal out of the sealing channel and pull up
on the front of the access cover. Remove the access
cover.