Polaris A12MH46AX Service Manual page 326

TRANSMISSION
NOTE: To ease assembly use a plastic tie strap to
hold the shift forks and the shift drum together
during assembly.
5. With the gearcase on it's side, hold the gear cluster
assembly and output assembly together. Carefully
install each shaft into their respective recess in the
gearcase.
6. With all the components in the correct position, install
the (4) output gear assembly retaining screws. Apply
Loctite 242® to the threads of the screws. Torque the
screws to specification.
8.20
Tie Strap
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
NOTE: If the transmission is in gear, place the
transmission in Neutral.
Output Gear Retaining Screws:
8-12 ft. lbs. (11-16 Nm)
7. Install the oil deflector shield into the gearcase. Apply
Loctite 242® to the threads of the screws. Torque the
screws to specification.
Oil Deflector Retaining Screws:
20-30 in. lbs. (2.3-3.4 Nm)
= T
= T