Polaris A12MH46AX Service Manual page 320

Table of Contents

Advertisement

TRANSMISSION
Gear Cluster Disassembly
20. Remove the bearing from the reverse shaft using a
bearing puller. Slide the engagement dog off of the
reverse shaft (see Figure 8-1).
Figure 8-1
21. Remove the retaining ring and washer from the
reverse shaft (see Figure 8-1).
22. Remove the bearing from the input shaft using a
bearing puller (see Figure 8-1).
23. Remove the 33T gear and needle bearing from the
reverse shaft (see Figure 8-1).
24. The reverse shaft should slide out of the silent chain
8.14
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
to separate the assembly.
25. Remove the rest of the ball bearings from each shaft.
26. Disassemble the other end of the reverse shaft.
Remove the retaining ring, washer, gear and needle
bearing from the reverse shaft (see Figure 8-2).
27. Remove the washer, retaining ring and engagement
dog from the reverse shaft (see Figure 8-2).
28. Remove the retaining ring, washer, 38T sprocket and
needle bearing from the reverse shaft (see Figure 8-
2).
Figure 8-2

Advertisement

Table of Contents
loading

Table of Contents