Wireless Profile Commands - NETGEAR ProSafe FVS318N Cli Reference Manual

dot11-config[radio-advance]> power_save_enable Y
dot11-config[radio-advance]> save
Related show command:

Wireless Profile Commands

dot11 profile configure <profile name>
This command configures a new or existing profile. After you have issued the dot11
profile configure command to specify the name of a profile, you enter the dot11-config
[profile] mode, and then you can configure one keyword and associated parameter or
associated keyword at a time in the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword (might consist
of two separate words)
ssid
broadcast_ssid
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
show dot11 radio
dot11 profile configure <profile name>
dot11
ssid <ssid name>
broadcast-ssid {Y | N}
security_type {Open | WEP | WPA | WPA2 | WPA+WPA2}
vlan_profile <vlan name>
wep authentication {Automatic | Open-System | Shared-Key}
wep encryption {64-bit-WEP | 128-bit-WEP}
wep {passphrase {{1 | 2 | 3 | 4} <passphrase>} | wep key
{{1 | 2 | 3 | 4} <key>}}
wpa encryption {TKIP | CCMP | TKIP+CCMP}
wpa authentication {PSK {wpa wpa-password <password>} | RADIUS |
PSK+RADIUS {wpa wpa_password <password>}}
pre-authentication {Y | N}
enable_active_time {N | Y {start hour <hour>} {start meridiem
{AM | PM}} {start minute <minute>} {stop hour <hour>}
{stop meridiem {AM | PM}} {stop minute <minute>}}
wlan_partition {Y | N}
dot11-config [profile]
Associated Keyword to Select
or Parameter to Type
ssid name
Y or N
Dot11 Mode Configuration Commands
Description
The name of the 802.11 profile SSID.
Enables or disables the SSID broadcast.
171