NETGEAR ProSafe FVS318N Cli Reference Manual page 22

Wireless-n 8-port gigabit vpn firewall
Hide thumbs Also See for ProSafe FVS318N:
Table of Contents

Advertisement

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 8. Security mode configuration commands (continued)
Submode
Command Name
security content_filter content_filtering configure
security content_filter trusted_domain add
content_filter
(continued)
security content_filter trusted_domain delete <row id>
security content_filter trusted_domain edit <row id>
security firewall advanced algs
security firewall attack_checks configure ipv4
security firewall attack_checks configure ipv6
security firewall attack_checks igmp setup
security firewall attack_checks jumboframe setup
security firewall attack_checks vpn_passthrough configure
security firewall ipv4 add_rule dmz_wan inbound
firewall
security firewall ipv4 add_rule dmz_wan outbound
security firewall ipv4 add_rule lan_dmz inbound
security firewall ipv4 add_rule lan_dmz outbound
security firewall ipv4 add_rule lan_wan inbound
security firewall ipv4 add_rule lan_wan outbound
security firewall ipv4 default_outbound_policy {Allow |
Block}
security firewall ipv4 delete <row id>
security firewall ipv4 disable <row id>
Overview of the Configuration Commands
22
Purpose
Configure web content
filtering.
Configure a new trusted
domain.
Delete a trusted domain.
Configure an existing trusted
domain.
Configure SIP support for the
ALG.
Configure WAN and LAN
security attack checks for IPv4
traffic.
Configure WAN security
attack checks for IPv6 traffic.
Enable or disable multicast
pass-through for IPv4 traffic.
Enable or disable jumbo
frames for IPv4 traffic.
Configure VPN pass-through
for IPv4 traffic.
Configure a new IPv4 DMZ
WAN inbound firewall rule.
Configure a new IPv4 DMZ
WAN outbound firewall rule.
Configure a new IPv4 LAN
DMZ inbound firewall rule.
Configure a new IPv4 LAN
DMZ outbound firewall rule.
Configure a new IPv4 LAN
WAN inbound firewall rule.
Configure a new IPv4 LAN
WAN outbound firewall rule.
Configure the default
outbound policy for IPv4
traffic.
Delete an IPv4 firewall rule.
Disable an IPv4 firewall rule.

Advertisement

Table of Contents
loading

Table of Contents