NETGEAR ProSafe FVS318N Cli Reference Manual page 63

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist
of two separate words)
flags
preference
mtu
life_time
Command example:
FVS318N> net radvd configure dmz
net-config[radvd]> enable Y
net-config[radvd]> mode Unicast-Only
net-config[radvd]> flags Managed
net-config[radvd]> preference High
net-config[radvd]> mtu 1500
net-config[radvd]> life_time 7200
net-config[radvd]> save
Related show command:
net radvd pool dmz add
This command configures the IPv6 RADVD pool of advertisement prefixes for the DMZ. After
you have issued the net radvd pool dmz add command, you enter the
net-config [radvd-pool-dmz] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
net radvd pool dmz add
Mode net
Step 2 Format
prefix_type {6To4 {sla_id <ID number>} | Global-Local-ISATAP
prefix_life_time <seconds>
Mode net-config [radvd-pool-dmz]
Associated Keyword to
Select or Parameter to Type
Managed or Other
Low, Medium, or High
number
seconds
show net radvd dmz setup
{prefix_address <ipv6-address>} {prefix_length
<prefix length>}}
Net Mode Configuration Commands
63
Description
Sets the flag:
• Managed. Specifies that the DHCPv6 stateful
protocol is used for autoconfiguration of the
address.
• Other. Specifies that the DHCPv6 stateful
protocol is used for autoconfiguration of other
(that is, nonaddress) information.
The wireless VPN firewall's preference in relation
to other hosts and routers in the DMZ.
The MTU size (integer) that is used in the RAs to
ensure that all nodes in the network use the same
MTU size. The default is 1500 seconds.
The advertisement lifetime in seconds (integer) of
the route. The default is 3600 seconds.