NETGEAR ProSafe FVS318N Cli Reference Manual page 226

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 2 Format
policy_name <policy name>
policy type {Global | Group {policy_owner <group name>} |
destination_object_type {NetworkResource | IPAddress |
In addition to a policy name, policy type, and destination object type, configure the
following for a network resource:
ip_version {IPv4 | IPv6}
resource_name <resource name>
policy_permission {Permit | Deny}
In addition to a policy name, policy type, and destination object type, configure the
following for an IP address:
ip_version {IPv4 {policy_address <ipaddress>} | IPv6
start_port <port number>
end_port <port number>
service_type {VPNTunnel | PortForwarding | All}
policy_permission {Permit | Deny}
In addition to a policy name, policy type, and destination object type, configure the
following for an IP network:
ip_version {IPv4 {policy_address <ipaddress>}
start_port <port number>
end_port <port number>
service_type {VPNTunnel | PortForwarding | All}
policy_permission {Permit | Deny}
In addition to a policy name, policy type, and destination object type, configure the
following for all addresses (that is, the destination_object_type keyword is set to
All):
ip_version {IPv4 | IPv6}
start_port <port number>
end_port <port number>
service_type {VPNTunnel | PortForwarding | All}
policy_permission {Permit | Deny}
Mode [sslvpn-policy-settings]
User {policy_owner <user name>}}
IPNetwork | All}
{policy_address6 <ipv6-address>}}
{policy_mask_length <subnet mask>} | IPv6 {policy_address6
<ipv6-address>} {policy_ipv6_prefix_length <prefix length>}}
VPN Mode Configuration Commands
226