NETGEAR ProSafe FVS318N Cli Reference Manual page 179

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
preshared_key
remote_wan_ipaddress
local_wan_ipaddress
Remote LAN IPv4 address information
remote_lan_ipaddress
remote_lan_net_mask
Remote LAN IPv6 address information
remote_lan_ipv6address
remote_lan_prefixLength prefix length
Command example:
FVS318N> vpn ipsec wizard configure Gateway
vpn-config[wizard]> ip_version IPv6
vpn-config[wizard]> conn_name FVS318N-to-Peer44
vpn-config[wizard]> preshared_key 2%sgd55%!@GH
vpn-config[wizard]> remote_wan_ipaddress peer44.com
vpn-config[wizard]> local_wan_ipaddress fe80::a8ab:bbff:fe00:2
vpn-config[wizard]> remote_lan_ipv6address fe80::a4bb:ffdd:fe01:2
vpn-config[wizard]> remote_lan_prefixLength 64
vpn-config[wizard]> save
Related show command:
vpn ipsec vpnpolicy status
To display the VPN policy configuration that the wizard created through the vpn ipsec
wizard configure command, issue the show vpn ipsec vpnpolicy setup
command:
FVS318N> show vpn ipsec vpnpolicy setup
Status Name Type
_______ _________________ ___________ ___________ ______________________________________ ______________________________ _____ ____
Enabled FVS318N-to-Peer44 Auto Policy Tunnel Mode 2002:408b:36e4:a:a8ab:bbff:fe00:1 / 64 fe80::a4bb:ffdd:fe01:2 / 64
Enabled FVS-to-Paris Auto Policy Tunnel Mode 192.168.1.0 / 255.255.255.0
Associated Keyword to
Select or Parameter to Type
key
ipaddress,
ipv6-address, or domain
name
ipaddress,
ipv6-address, or domain
name
ipaddress
subnet mask
ipv6-address
show vpn ipsec vpnpolicy
IPSec Mode Local
VPN Mode Configuration Commands
179
Description
The key (alphanumeric string) that needs to
be entered on both peers.
Depending on the setting of the ip_version
keyword, specifies an IPv4 or IPv6 local WAN
address. You can also specify a domain name.
Depending on the setting of the ip_version
keyword, specifies an IPv4 or IPv6 local WAN
address. You can also specify a domain name.
The IPv4 remote LAN address when the
ip_version keyword is set to IPv4.
The IPv4 remote LAN subnet mask when the
ip_version keyword is set to IPv4.
The IPv6 remote LAN address when the
ip_version keyword is set to IPv6.
The IPv6 remote LAN prefix length when the
ip_version keyword is set to IPv6.
setup, show vpn ipsec ikepolicy
Remote
192.168.50.0 / 255.255.255.255 SHA-1 3DES
setup, and show
Auth Encr
SHA-1 3DES