NETGEAR ProSafe FVS318N Cli Reference Manual page 83

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
lan_users group_wise
wan_users
wan_user_start_ip
wan_user_end_ip
QoS profile, logging, bandwidth profile, and NAT IP address
qos_priority
log
bandwidth_profile
nat_ip type
nat_ip address
Associated Keyword to Select or
Parameter to Type
group name
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
Normal-Service, Minimize-Cost,
Maximize-Reliability,
Maximize-Throughput, or
Minimize-Delay
NEVER or ALWAYS
profile name
WAN_INTERFACE_ADDRESS or
SINGLE_ADDRESS
ipaddress
Security Mode Configuration Commands
83
Description
The name of the LAN group. The
group name is either a default
name (Group1, Group2, Group3,
and so on) or a custom name that
you specified with the net lan
lan_groups edit <row id> <new
group name> command.
The type of WAN address.
There are two options:
• The IP address if the wan_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
wan_users keyword is set to
ADDRESS_RANGE.
The end IP address if the
wan_users keyword is set to
ADDRESS_RANGE.
The type of QoS that applies to the
rule.
Enables or disables logging.
The profile that you have
configured with the security
bandwidth profile add command.
Specifies the type of NAT IP
address:
• WAN_INTERFACE_ADDRESS.
The IP address of the WAN
(broadband) interface.
• SINGLE_ADDRESS. Another IP
address, which you need to
configure using the nat_ip
address keywords.
The NAT IP address, if the nat_ip
type keywords are set to
SINGLE_ADDRESS.