NETGEAR ProSafe FVS318N Cli Reference Manual page 87

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
lan_user_end_ip
lan_user group_wise
wan_user
wan_user_start_ip
wan_user_end_ip
Logging and bandwidth profile
log
bandwidth_profile
Command example:
FVS318N> security firewall ipv4 add_rule lan_wan inbound
security-config[firewall-ipv4-lan-wan-inbound]> service_name default_services HTTP
security-config[firewall-ipv4-lan-wan-inbound]> action
security-config[firewall-ipv4-lan-wan-inbound]> send_to_lan_server SINGLE_ADDRESS
security-config[firewall-ipv4-lan-wan-inbound]> send_to_lan_server_start_ip 192.168.5.69
security-config[firewall-ipv4-lan-wan-inbound]> wan_destination_ip_address WAN
security-config[firewall-ipv4-lan-wan-inbound]> wan_user ANY
security-config[firewall-ipv4-lan-wan-inbound]> log NEVER
security-config[firewall-ipv4-lan-wan-inbound]> save
Related show command:
Associated Keyword to Select or
Parameter to Type
ipaddress
group name
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
NEVER or ALWAYS
profile name
show security firewall ipv4 setup lan_wan
Security Mode Configuration Commands
87
Description
The end IP address if the
lan_user address_wise
keywords are set to
ADDRESS_RANGE.
The name of the LAN group. The
group name is either a default
name (Group1, Group2, Group3,
and so on) or a custom name that
you specified with the
lan_groups edit <row id> <new
group name> command.
For an inbound rule, this option is
available only when the WAN mode
is Classical Routing.
The type of WAN address.
There are two options:
• The IP address if the wan_user
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
wan_user keyword is set to
ADDRESS_RANGE.
The end IP address if the
wan_user keyword is set to
ADDRESS_RANGE.
Enables or disables logging.
The profile that you have
configured with the
bandwidth profile add
ALWAYS_ALLOW
net lan
security
command.