NETGEAR ProSafe FVS318N Cli Reference Manual page 172

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist
of two separate words)
security_type
vlan_profile
WEP
wep authentication
wep encryption
wep passphrase
wep key
WPA
wpa encryption
Associated Keyword to Select
or Parameter to Type
Open, WEP, WPA, WPA2, or
WPA+WPA2
vlan name
Automatic, Open-System, or
Shared-Key
64-bit-WEP or 128-bit-WEP The type of WEP encryption.
1, 2, 3, or 4 and passphrase
1, 2, 3, or 4 and key
TKIP, CCMP, or TKIP+CCMP
Dot11 Mode Configuration Commands
172
Description
The type of security and associated encryption.
Your selection determines which other keywords
and associated parameters and keywords you
need to set.
The VLAN to which the wireless profile is
allocated. If you do not specify a VLAN, the
wireless profile is assigned to the default VLAN.
The type of WEP authentication:
• Automatic. A key is required to connect to this
profile. You need to configure the wep
passphrase keyword and its associated
parameter and keyword for automatic generation
of the WEP key. You also need to set the
wep encryption keyword and its associated
keyword.
• Open-System. Anyone can connect to this
profile. You need to set the wep encryption
keyword and its associated keyword.
• Shared-Key. A key is required to connect to this
profile. You need to set the wep key keyword
and its associated parameter and keyword for
manual generation of the WEP key. You also
need to set the wep encryption keyword and
its associated keyword.
Both the number of the WEP key (the index) and
the passphrase to generate the WEP key from.
You have to set both.
Both the number of the WEP key (the index) and
the actual key.
Note: If you have used the wep passphrase
keyword and its associated parameter and
keyword, you do not need to set the wep key
keyword and its associated parameter and
keyword.
The WPA encryption type. Note the following:
• WPA supports TKIP and TKIP+CCMP.
• WPA2 supports CCMP and TKIP+CCMP.
• WPA+WPA2 supports TKIP+CCMP.