NETGEAR ProSafe FVS318N Cli Reference Manual page 19

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 7. Net mode configuration commands (continued)
Submode Command Name
net ipv6_tunnel isatap add
net ipv6_tunnel isatap delete <row id>
ipv6_tunnel
net ipv6_tunnel isatap edit <row id>
net ipv6_tunnel six_to_four configure
net lan dhcp reserved_ip configure <mac address>
net lan dhcp reserved_ip delete <mac address>
net lan ipv4 advanced configure
net lan ipv4 configure <vlan id>
net lan ipv4 default_vlan
net lan ipv4 delete <vlan id>
net lan ipv4 disable <vlan id>
net lan ipv4 enable <vlan id>
net lan ipv4 multi_homing add
lan
net lan ipv4 multi_homing delete <row id>
net lan ipv4 multi_homing edit
net lan ipv6 configure
net lan ipv6 multi_homing add
net lan ipv6 multi_homing delete <row id>
net lan ipv6 multi_homing edit
net lan ipv6 pool configure
net lan ipv6 pool delete <start ipv6-address>
net lan lan_groups edit <row id> <new group name>
Overview of the Configuration Commands
19
Purpose
Configure a new IPv6 ISATAP tunnel.
Delete an IPv6 ISATAP tunnel.
Configure an existing IPv6 ISATAP tunnel.
Enable or disable automatic (6to4)
tunneling.
Bind a MAC address to an IP address for
DHCP reservation or change an existing
binding, and assign a LAN group.
Delete the binding of a MAC address to
an IP address.
Configure advanced LAN settings such as
the MAC address for VLANs and ARP
broadcast.
Configure a new or existing VLAN.
Configure the default VLAN for each port.
Delete a VLAN.
Disable a VLAN.
Enable a VLAN.
Configure a new secondary IPv4 address.
Delete a secondary IPv4 address.
Configure an existing secondary IPv4
address.
Configure the IPv6 LAN address settings
and DHCPv6.
Configure a new secondary IPv6 address.
Delete a secondary IPv6 address.
Configure an existing secondary IPv6
address.
Configure a new or existing IPv6 LAN
DHCP address pool.
Delete an IPv6 LAN DHCP address pool.
Change an existing LAN default group
name.