NETGEAR ProSafe FVS318N Cli Reference Manual page 34

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
pppoe delay_in_reset
pppoe get_ip_dynamically Y or N
pppoe static_ip
pppoe subnet_mask
pppoe get_dns_from_isp
pppoe primary_dns
pppoe secondary_dns
PPTP (These keywords consist of two separate words)
pptp username
pptp password
pptp AccountName
pptp DomainName
pptp connectivity_type
Associated Keyword to
Select or Parameter to Type
seconds
ipaddress
subnet mask
Y or N
ipaddress
ipaddress
user name
password
account name
domain name
keepalive or
idletimeout
Net Mode Configuration Commands
34
Description
After the connection has been reset, the
number of seconds of delay before an
PPPoE connection attempt is made.
Specifies whether or not the IP address is
dynamically received from the ISP. If it is not,
you need to issue the static_ip keyword
and enter the static IP address, and issue the
subnet_mask keyword and enter the
subnet mask.
The static IP address if your IP address is not
dynamically received from the ISP.
The subnet mask if your IP address is not
dynamically received from the ISP.
Specifies whether or not the IP address is
dynamically received from the ISP. If you
select N, you need to issue the pppoe
primary_dns keyword and enter the IP
address of the primary DNS server. For a
secondary DNS server, issue the
pppoe secondary_dns keyword, and
enter the IP address.
The IP address of the primary DNS server if
your IP address is not dynamically received
from the ISP.
The IP address of the optional secondary
DNS server if your IP address is not
dynamically received from the ISP.
The user name (alphanumeric string) to log
in to the PPTP service, if required.
The password (alphanumeric string) to log in
to the PPTP service, if required.
The PPPoE account name (alphanumeric
string).
The PPPoE domain name (alphanumeric
string).
The type of PPTP connection. If you select
idletimeout, you need to issue the
pptp idle_time keyword and enter the
idle time-out period.