NETGEAR ProSafe FVS318N Cli Reference Manual page 121

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
destination_address_type
destination_start_address
destination_end_address
QoS profile and logging
qos_priority
log
Command example: See the command example for the
Related show command:
security firewall ipv6 delete <row id>
This command deletes an IPv6 firewall rule by deleting its row ID.
Format
security firewall ipv6 delete <row id>
Mode security
Related show command:
Associated Keyword to Select or
Parameter to Type
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipv6-address
ipv6-address
Normal-Service, Minimize-Cost,
Maximize-Reliability,
Maximize-Throughput, or
Minimize-Delay
NEVER or ALWAYS
show security firewall ipv6 setup
show security firewall ipv6 setup
Security Mode Configuration Commands
121
Description
The type of destination address.
There are two options:
• The IPv6 address if the
destination_address_type
keyword is set to
SINGLE_ADDRESS.
• The start IPv6 address if the
destination_address_type
keyword is set to
ADDRESS_RANGE.
The end IPv6 address if the
destination_address_type
keyword is set to
ADDRESS_RANGE.
The type of QoS that applies to
the rule. You can apply QoS to
LAN WAN and DMZ WAN
outbound rules only.
Enables or disables logging.
security firewall ipv6 configure command.