NETGEAR ProSafe FVS318N Cli Reference Manual page 88

Wireless-n 8-port gigabit vpn firewall
Hide thumbs Also See for ProSafe FVS318N:
Table of Contents

Advertisement

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security firewall ipv4 edit_rule lan_wan inbound <row id>
This command configures an existing IPv4 LAN WAN inbound firewall rule. After you have
issued the security firewall ipv4 edit_rule lan_wan inbound command to
specify the row to be edited (for row information, see the output of the
command), you enter the security-config [firewall-ipv4-lan-wan-outbound]
ipv4 setup lan_wan
mode. You can then edit one keyword and associated parameter or associated keyword at a
time in the order that you prefer. However, note that the setting of the action keyword
determines which other keywords and parameters you can apply to a rule.
Step 1
Format
security firewall ipv4 edit_rule lan_wan inbound <row id>
Mode
security
Step 2
Format
service_name {default_services <default service name> |
action {ALWAYS_BLOCK | ALWAYS_ALLOW |
send_to_lan_server {SINGLE_ADDRESS {send_to_lan_server_start_ip
translate_to_port_number enable {N | Y
wan_destination_ip_address {WAN | OTHERS
lan_user {address_wise {ANY | SINGLE_ADDRESS {lan_user_start_ip
wan_user {ANY | SINGLE_ADDRESS {wan_user_start_ip <ipaddress>}
log {NEVER | ALWAYS}
bandwidth_profile <profile name>
Mode
security-config [firewall-ipv4-lan-wan-inbound]
{custom_services <custom service name>}
BLOCK_BY_SCHEDULE_ELSE_ALLOW {schedule {Schedule1 |
Schedule2 | Schedule3}} | ALLOW_BY_SCHEDULE_ELSE_BLOCK
{schedule {Schedule1 | Schedule2 | Schedule3}}}
<ipaddress>} | ADDRESS_RANGE {send_to_lan_server_start_ip
<ipaddress>} {send_to_lan_server_end_ip <ipaddress>}}
{translate_to_port_number port <number>}}
{wan_destination_ip_address_start <ipaddress>} | RANGE
{wan_destination_ip_address_start <ipaddress>}
{wan_destination_ip_address_end <ipaddress>}}
<ipaddress>} | ADDRESS_RANGE {lan_user_start_ip <ipaddress>}
{lan_user_end_ip <ipaddress>}} | group_wise <group name>}
| ADDRESS_RANGE {wan_user_start_ip <ipaddress>}
{wan_user_end_ip <ipaddress>}}
Security Mode Configuration Commands
88
show security firewall

Advertisement

Table of Contents
loading

Table of Contents