View The Status Of A Wireless Profile - NETGEAR ProSafe FVS318N Reference Manual

WARNING:
When configuring the wireless VPN firewall from a wireless
computer whose MAC address is not in the access control list and
when the ACL policy status is set to deny access, you will lose
your wireless connection when you click Apply. You then need to
access the wireless VPN firewall from a wired computer or from a
wireless computer that is on the access control list to make any
further changes.

To remove one or more MAC addresses from the table:
1. In the MAC Address table, select the check box to the left of each MAC address that
you want to delete, or click the Select All table button to select all MAC addresses.
2. Click the Delete table button.

View the Status of a Wireless Profile


To view the status of a specific wireless profile:
On the Wireless Profiles screen (see
Status column for the wireless profile for which you want to display the status information.
The Access Point screen displays:
Figure 57.
Note: On the Access Point screen, the wireless profile is stated in the AP
Name column: the first wireless profile is indicated by ap1, the
second by ap2, and so on.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 54
Wireless Configuration and Security
on page 112), click the Status button in the
119