NETGEAR ProSafe FVS318N Cli Reference Manual page 188

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
manual_spi_out <number>
manual_authentication_algorithm {MD5 | SHA-1}
manual_authentication_key_in <key>
manual_authentication_key_out <key>
auto_sa_lifetime {bytes <number> | {seconds <seconds>}
auto_encryption_algorithm {None | DES | 3DES | AES-128 |
auto_authentication_algorithm {MD5 | SHA-1}
auto_enable_pfskeygroup {N | Y {auto_dh_group {Group1_768_bit |
auto_select_ike_policy <ike policy name>
Mode vpn-config [vpn-policy]
Keyword (might consist of two separate
words)
General policy settings
general_policy_type
AES-192 | AES-256}
Group2_1024_bit | Group5_1536_bit}}}
Associated
Keyword to Select
or Parameter to
Type
Auto-Policy or
Manual-Policy
VPN Mode Configuration Commands
188
Description
Species whether the policy type is an auto or
manual VPN policy:
• Auto-Policy. The inbound and outbound
policy settings for the VPN tunnel are
automatically generated after you have
issued the keywords and associated
parameters that are listed in the Auto policy
settings section of this table. All other VPN
policy settings need to be specified
manually.
• Manual-Policy. All settings need to be
specified manually, excluding the ones in
the Auto policy settings section of this
table.