A-14
Encoder Cables
IMS Differential Encoder Cable (36" leads) ..................................................................... ED-CABLE-2
Recommended Encoder Mating Connectors
IMS recommends the following mating connectors (or equivalent) if you make your own cables.
Differential Encoder
Tyco Electronics Connector with 10 Preloaded IDC Pins* ................................................ 102694-3
Shell with Polarizing Key ......................................................................................... 102537-3
Back Cover .............................................................................................................. 102536-3
Tyco Electronics 10 Pin IDC Ribbon Cable Connector .................................................... 499997-1
3M 28 AWG x 0.5 x 10 Conductor Ribbon Cable .............................................................. 3365/10
*For AWG 22 to 28 wires.
MForce MicroDrive Motion Control Hardware Manual Revision R112706