Aux-Logic Supply Connection - IMS Mforce micro drive Reference

Aux-Logic Supply Connection

2-6
The Auxiliary Logic input will maintain power to the Logic circuitry in the absence of motor power. The user will still be
able to communicate with the device, however motion commands will be ignored and the internal counter will update by
the number of pulses commanded. If stall detection is enabled a stall will register.
Supply
Aux-Logic Voltage: +12 to +24 VDC
Aux-Logic Power Requirement:
1.93 Watts (Worst Case)
B B
Pin 5
P2
10-Pin IDC
Side View
DO NOT Ground the Logic Supply at
!
Communications Ground or damage will occur
to the drive. Ground Aux Logic at Power Ground.
A
Ground
B
+12 to +24 VDC
B B
Pin 5
P2
10-Pin Wire
Crimp
Figure 2.1.3: Aux-Logic Connection
Motion Control MForce MicroDrive Hardware Manual Revision R112706
12" Flying Leads
P1
Black
A
7-Pin Pluggable Terminal
1 2 3 4 5 6 7
Pin 6
A
16-Pin Wire Crimp
Pin 16
A
Front View
P1