Options And Accessories - IMS Mforce micro drive Reference

1-16

Options and Accessories

Motors and Encoders
IMS offers a wide range of motors, encoders and accessories recommended for interface with the Motion Con-
trol MForce MicroDrive. For complete specifications on these products, please visit the IMS web site at www.
imshome.com. See Appendix C for Encoder information and Appendix E for Motor details.
Power Supplies
IMS recommends the following power supplies for operating the MForce MicroDrive: ISP402, ISP404,
ISP200-4. For complete power supply specifications, visit the IMS web site at www.imshome.com. See Ap-
pendix A for recommended IMS power supplies.
Communications Converter Cables
These convenient accessory cables connect a PC's USB Port to the P2 Connector of the MForce MicroDrive.
Total cable length is 12.0' (3.6m). An in-line RS-422 converter enables parameter setting to a single Motion
Control MForce. Purchase recommended with first orders. See Appendix D for details.
USB to 10-Pin IDC ..............................................................................................MD-CC400-000
10-Pin IDC to Wire Crimp Adapter ........................................................................... MD-ADP-H
Prototype Development Cables
To speed prototyping, these 10' (3m) cables are available:
Comm: 10-pin Wire Crimp Cable ........................................................................ PD10-1434-FL3
Motor Interface: 4-pin Wire Crimp Cable ................................................................. PD04-MF17-FL3
See Appendix D for details.
Motion Control MForce MicroDrive Hardware Manual Revision R112706