IMS Mforce micro drive Reference page 18

1-10

Open or Closed Loop Control

Programmable Motor Run and Hold Currents

Four +5 to +24 VDC I/O Lines Accept Sourcing or Sinking Outputs

One 10 Bit Analog Input Selectable: 0 to +10 VDC, 0 to +5 VDC, 0-20 mA, 4-20 mA

0 to 5MHz Step Clock Rate Selectable in 0.59Hz Increments

RS-422/485 Communications (Optional CANopen dtails available at www.imshome.com)

62 Software Addresses for Multi-Drop Communications

Simple 1 to 2 Character Instructions

Interface Options:
- 12.0" (30.5cm) Flying Leads
- 7-Pin Pluggable Terminal
Expanded Features – Available only in the Plus

+5 to +24 VDC Tolerant Sourcing or Sinking, Inputs and Outputs:

8 I/O Points with Electronic Gearing (or)

4 I/O Points with External/Remote Encoder for Closed Loop Control

High Speed Position Capture Input or Trip Output

Pluggable Locking Wire Crimp Interface
Version
2
Motion Control MForce MicroDrive Hardware Manual Revision R112706