Ringing Tone Selection for CO Buttons
Description
Allows the digital proprietary telephone user to select the desired ringer frequency for each CO
button. This distinguishes different incoming outside calls.
Conditions
There are eight ringer frequencies available. One of them can be assigned to a CO button that
is assigned as each of the following buttons: Single-CO, Group-CO, or Loop-CO button. It is
not possible to assign a ringer frequency to any other button.
Programming Guide References
• [005] Flexible CO Button Assignment
Features Guide References
None
User Manual References
• 2.2.4 Ringing Tone Selection for CO Buttons
Features Guide
General Features
219