Call Transfer, Screened — to Extension
Description
Allows the extension user to voice-announce to the extension and transfer the call.
Conditions
• The destination extension must have a CO button which is common to the outside line in
use by the transferring party.
• The destination extension shows the Caller ID and the extension number where the call was
transferred from on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
1 0 1 → 1 2 3 4 5 6 7 8 9
The priority of the display is:
Caller ID name > Caller ID number > Outside line number and name.
If your telephone has a two, three or six line display, both the Caller ID name and number are
displayed.
The system can select to show CLIP or the extension number and name by program "[990]
System Additional Information, Area 10 - Bit 15".
Programming Guide References
• [990] System Additional Information
Features Guide References
None
User Manual References
• 4.3.25 Call Transfer — to Extension
Features Guide
General Features
69