Call Transfer, Unscreened — To Extension - Panasonic KX-TD816 Features Manual

Call Transfer, Unscreened — to Extension
Description
Allows the user to transfer an intercom or outside call directly to an extension party. After
dialing the destination extension, the user replaces the handset while listening for the ringback
tone.
Conditions
• If the destination party does not answer within the transfer recall time, the call will return
to the user or Operator 1. You can select either one by system programming.
• This function is possible when the destination is sending ringback or busy tone. If the
destination is busy, Camp-On Transfer occurs.
• The ringing signal pattern follows the regular ringing pattern depending on the party being
transferred: outside or extension call ringing.
• An outside call can be transferred directly to a Uniform Call Distribution (UCD) group so
that an idle extension is automatically hunted by UCD. If all extensions in a UCD group are
busy, the incoming outside call will be handled by the UCD Time Table.
• It is possible for any extension user to transfer a call to the modem for remote maintenance.
• If music on hold is enabled, music is sent to the caller while being transferred. It is system-
programmable whether to send ringback tone or music on hold to the caller by program
"[990] System Additional Information, Area 01 - Bit 1".
• The destination extension must have a CO button which is common to the outside line in
use by the transferring party.
Programming Guide References
• [201] Transfer Recall Time
• [990] System Additional Information
Features Guide References
None
User Manual References
• 4.3.25 Call Transfer — to Extension
Features Guide
General Features
71