Panasonic KX-TD816 Features Manual page 233

(9) CD (Condition Code): shows call handling type with the following codes:
TR:
Transfer
FW:
Call Forwarding to Outside Line
D0:
*1
Non Security Outside Line Access using Direct Inward System Access (DISA)
D1 through D32:
*1
DISA User Codes 1 through 32
RM:
*1
Remote access to a modem
RC:
Received an incoming call
AN:
Answered an incoming call
NA:
Unanswered an incoming call
Conditions
• Connect a printer to the Serial Interface (RS-232C) connector of the main unit. After
connecting a printer, do not press the RETURN key, if provided on the printer, for 10
seconds.
• When programmed for outgoing toll calls only, printing occurs only for calls which start
with the numbers stored in any Denied Code Table from levels 2 to 6. If Automatic Route
Selection (ARS) is employed, the modified number is checked against these tables.
• This system can store information of up to 100 calls. If more calls are originated or received,
previous records are deleted starting with the oldest one.
• It is possible to select the SMDR format for an incoming call with Caller ID, the caller's
number only or caller's number and name, by program [990], Area 05 - Bit 12.
• It is possible to select whether the SMDR prints out received incoming calls (RC) and
answered incoming calls (AN) information by program [990], Area 05 - Bit 13.
• It is possible to select whether the SMDR prints out the DID subscriber number by program
[990], Area 07 - Bit 16. If it is printed out, it replaces the Caller ID number.
• This data is not deleted when you reset the system.
• If the system clock is not set by System Programming or if the calendar IC is out of order,
the date and time will not be printed out.
• If the FLASH signal is manually sent during a conversation, the call record is printed and a
new record is started.
Connection References
• 2.3.8 Printer and PC Connection
Available for the KX-TD1232 only.
*1
Features Guide
General Features
233