Operator Call
Description
Allows the extension user to call an extension operator by dialing the feature number, if at least
one operator is assigned. There can be one or two extensions assigned as Operator 1 and 2.
Conditions
When an operator call (default: 0) is made, the call is connected to Operator 1 first, and then
Operator 2 if Operator 1 is busy. Through System Programming, it is possible to change the
routing so that Operator 1 and Operator 2 are called simultaneously when the operator is called.
Programming Guide References
• [006] Operator / Manager Extension Assignment
• [100] Flexible Numbering
• [990] System Additional Information
Features Guide References
None
User Manual References
• 4.3.63 Operator Call
Features Guide
General Features
191