Caller Id - Panasonic KX-TD816 Features Manual

General Features

Caller ID

Description
Provides the display proprietary telephone and single line telephone users with caller
information, such as his / her name and telephone number, on the outside line assigned to
receive Caller ID service calls.
Conditions
• An optional Caller ID Card (KX-TD193) must be installed.
• For single line telephone users, an 8-Station Line Unit with SLT CID (KX-TD171) must be
installed. This card adds eight extensions including either one of two extensions which
enables the Caller ID feature for single line telephone users. Program "[133] Caller ID
Extension Assignment" is required to determine the Caller ID enabling extensions.
However, receiving or not receiving Caller ID information depends on the type of single
line telephone you have.
• Up to 500 Caller ID entry numbers can be stored in a table called the "Caller ID Table" in
the system. Each entry can consist of a caller's telephone number and name.
• If neither the telephone number nor the name is stored in the Caller ID Table, the number
sent from Caller ID service is displayed.
• If the network provides a single message, the system searches for the name from the number
in the Caller ID Table and displays both of them.
• The outside lines where a Caller ID service is offered by a Central Office must be assigned.
• A display digital proprietary telephone (KX-T7433, KX-T7436, KX-T7230 or KX-T7235)
user can record call information received by Caller ID (Call Log, Incoming feature).
• An analog proprietary telephone will show either the name or the number. To alternate the
display, press the
• If an outside line name is assigned or the DID (Direct Inward Dialing) lines are connected,
the user can select the initial display, Caller ID, outside line name or DID extension name
by Station Programming.
• A single line telephone, connected with a digital proprietary telephone by the XDP feature,
can receive Caller ID information. But one connected in parallel with an analog or digital
proprietary telephone cannot receive the information.
• Caller ID information is for outside calls only. Call information transferred by the Call
Forwarding, IRNA, and Station Hunting features can be sent to the destination extension.
Call information transferred by the Call Transfer, Screened - to Extension feature cannot be
sent. However, when a call is transferred by the Call Transfer, Unscreened feature, the
information can be sent to the destination extension.
• If an ID Code transmitted from an ISDN line is found in the Caller ID Code Table, the
caller's ID Code is displayed on the called party's telephone. If an ID Code is assigned a
name, the name is displayed with the ID Code.
74
key.
Features Guide