Panasonic KX-TD816 Features Manual page 244

General Features
For more information and programming instructions, refer to the Serial Interface / Remote
Programming & Diagnosis Manual.
Conditions
• A proprietary telephone can be used to perform System Programming.
• Access to System Programming is allowed only one at a time.
• To access system administration, a valid password must be entered. The password is
factory-programmed and can be changed.
• System administration can be performed on-line except for the procedures of the diagnosis.
If the system goes off-line, the system functions as if it was in power failure. (Refer to
Power Failure Transfer feature.)
Connection References
• 2.4.7 DISA Card and Remote Card / Unit Installation
Programming Guide References
• [107] System Password
• [813] Floating Number Assignment
• [814] Modem Standard
• [817] KX-TD197 / KX-TD198 Baud Rate Set
Features Guide References
• System Programming with Proprietary Telephone
• Station Message Detail Recording (SMDR)
User Manual References
Not applicable.
244 Features Guide