Management; Upnp; Snmp - LevelOne WAP-6101 User Manual

WPA-6101 300Mbps Wireless Ceiling Gigabit PoE Access Point
2. Association control: Check "Association control" to enable the control of which
wireless client can associate to the wireless LAN. If a client is denied to
associate to the wireless LAN, it means the client can't send or receive any data
via this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to associate to the wireless LAN.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.
3.2.2

Management

3.2.2.1 UPNP

UPnP Internet Gateway Device (IGD) Standardized Device Control Protocol is a NAT
port mapping protocol and is supported by some Network device. It is a common
communication protocol of automatically configuring port forwarding. Applications
using peer-to-peer networks, multiplayer gaming, and remote assistance programs
need a way to communicate through home and business gateways. Without IGD one
has to manually configure the gateway to allow traffic through, a process which is
error prone and time consuming
This device supports the UPnP Internet Gateway Device (IGD) feature. By default, it
is enabled.

3.2.2.2 SNMP

In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to
give a user the capability to remotely manage a computer network by polling and
setting terminal values and monitoring network events.