Snmp Management; Figure 32 Snmp Configuration - LevelOne WAB-5120 User Manual

300mbps 5g wireless outdoor passive poe access point/bridge

Hide thumbs Also See for WAB-5120:

Table of Contents

SNMP Management

The WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge supports SNMP for

convenient remote management. Open "Remote Settings" in "Management Privacy Mode" shown

below. Set the SNMP parameters and obtain MIB file before remote management.

Protocol Version

Select the SNMP version, and keep it identical on the CPE and the SNMP manager. The

WAB-5120 supports SNMP v2/v3.

Server Port

Change the server port for a service if needed; however you have to use the same port to use that

service for remote management.

Get Community

Specify the password for the incoming Get and GetNext requests from the management station.

By default, it is set to public and allows all requests.

Set Community

Specify the password for the incoming Set requests from the management station. By default, it is

set to private.

Table of Contents