Snmp - LevelOne WAP-6012 User Manual

SNMP

SNMP (Simple Network Management Protocol) is only useful if you have a SNMP
program on your PC. To reach this screen, select SNMP in the Management section
of the menu.
Data - SNMP Screen
General
SNMP
Read Only com-
munity
Read/Write
Community
SNMPv3
User Name
Authentication
Protocol
Authentication
Key
Private Protocol
Private Key
Managers
Any Station
Only this station
Figure 60: SNMP Screen
Use this to enable or disable SNMP as required
Data can be read, but not changed.
Data can be read, and setting changed.
Enter the user name for SNMPv3.
Select the authentication protocol used by SNMPv3.
Enter the authentication key required by SNMPv3.
Select the private protocol as required.
Enter the private key here.
The IP address of the manager station is not checked.
The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Access Point Management
71