Fault Messages - Miele PW 6241 Operating And Installation Instructions

Display Maintenance notice
^ Call Technical Service for maintenance if the dis-
play shows the following message after turning the
machine on.
Maintenance notice
§
Call Technical Service.
The display goes out after 5 seconds.

Fault messages

,
Repairs to electrical or steam appliances
should only be carried out by a Miele authorized
technician in accordance with local and national
safety regulations. Unauthorized repairs could
cause injury or machine damage.
Faults that occur before or after the start of a program
flash in the display.
A
If the display remains off, the washer has no power.
^ Check the plug, main switch and fuses on-site.
y
^ Press "Start".
This fault message can also indicate that the overload
cut-out of the drive motors has over heated.
^ Allow the motor to cool.
Frequently asked questions
Power failure
Program stop
Press Start.
f
31