Fabric Softener - Miele PW 6241 Operating And Installation Instructions

Use
Detergent
Only use the correct amount of high efficiency low
sudsing detergent. Too much detergent will cause
oversudsing.
Dosage
Follow the instructions on the detergent packaging to
ensure the correct usage and dosage amount for
your water hardness.
Adjust the amount of detergent if the load is smaller
and more or less soiled than normal.
Water hardness
Water Water qua-
hardness lity
levels
I soft
II moderate
III hard
IV very hard
If you do not know the water hardness in your area
contact your local water authority.
12
Hardness le- German
vel in mmol/l hardness
°d
0 - 1.3 0 - 7
1.3 - 2.5 7 - 14
2.5 - 3.8 14 - 21
over 3.8 over 21

Fabric softener

^ Pour liquid fabric softener into the compartment ac-
cording to the manufacturer's instructions. Do not
exceed the maximum fill level, the excess will
prematurely activate the siphon and be wasted.
^ Close the compartment lid and push in the dispen-
ser drawer.
The fabric softener will automatically be dispensed
during the final rinse cycle.
A small amount of water will remain in the
compartment at the end of the program.
Never mix fabric softener and starch in the fabric
softener compartment, 3. This will clog the
dispenser.