Peak Load Cutoff; Communication Module; Load Module - Miele PW 6241 Operating And Installation Instructions

Peak load cutoff

When activating the peak load cutoff the heat is
turned off and the program is stopped. The display
shows:
1 Hot Wash
Program stop - Peak load function
Program will continue.
i ü
When the peak load function ends the program will
continue automatically.

Communication module

The communication module makes it possible to
connect the machine to a PC (Personal Computer).
The outlet for the module is on the back of the
machine.
This requires a special Editor Program which is
available from the Miele Professional Department.

Load module

If the machine is equipped with a load module, the
load weight will be displayed, in 0.5 lb increments,
while loading the laundry. The maximum laundry
weight is displayed next to the selected program.
^ Reset with the -> I <- "zero - setting" if the weight
display does not show "00.0" when the drum is
empty.
f
1
140 °F
+i
If there was still laundry in the drum when the weight
display was reset, the display shows:
1
140 °F
+i
^ Reset again with the -> I <- button.
If the machine is overloaded (wet laundry) the
machine calculates after the programs start with the
nominal value. This value is saved in the operating
data module.
At the end of a program, with the drum stationary, the
residual moisture of the laundry is displayed.
1
Program end
Door can be opened.
See "Use - Adjust the program" for more information.
Optional modules
Hot Wash
Main wash
Rinse
m k m
Hot Wash
Main wash
Rinse
m k m
Hot Wash
Residual moisture 60 %
m FC
00.0 / 56 lb
e
A
-> I <-
- -.- 56 lb
/
e
A
-> I <-
A
25