Chapter 4 User Preferences & Miscellaneous Digital Scanner Options; Introduction - Motorola Symbol DS9808 Product Reference Manual

Chapter 4 User Preferences & Miscellaneous
Digital Scanner Options

Introduction

You can program the digital scanner to perform various functions, or activate different features. This chapter
describes each user preference feature and provides programming bar codes for selecting these features.
The digital scanner ships with the settings shown in
Parameters for all host device and miscellaneous defaults). If the default values suit requirements, programming is
not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile
memory and are preserved even when the digital scanner is powered down.
NOTE Most computer monitors allow scanning the bar codes directly on the screen (when using the imaging
engine). When scanning from the screen, be sure to set the document magnification to a level where you
can see the bar code clearly, and bars and/or spaces are not merging.
If not using a USB cable, select a host type (see each host chapter for specific host information) after the power-up
beeps sound. This is only necessary upon the first power-up when connected to a new host.
To return all features to default values, scan the
bar code menus, asterisks indicate (
Set Default Parameter on page
*
)default values.
*
*
High Volume
Indicates Default
Table 4-1 on page 4-2 (also see
Feature/Option
(00h)
Option Hex Value
Appendix A, Standard Default
4-5. Throughout the programming