Tool:
Multi Hex Tool with
Phillips Screwdriver
6. Seat and Back Cushions Installation
Remove eight M6x15 Bolts (21) and eight Ø6 Washers (58) from the back of the Seat and
Back Cushions (7, 8). Remove bolts with the Multi Hex Tool with Phillips Screwdriver
provided. Then attach the Seat and Back Cushions (7, 8) onto the Back and
Seat Support Bracket (1) with eight M6x15 Bolts (21) and eight Ø6 Washers (58) that were
removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
15